Grand Distinction<sup>®</sup> Interior Paint

Grand Distinction® Interior Paint

Immerse yourself in the distinctive beauty of super-premium Pittsburgh Paints & Stains Grand Distinction paint and primer in one. By providing outstanding coverage, stain and scrub resistance, and washability, Grand Distinction is a rich, long-lasting finish with a lifetime guarantee, which is why it is Simply Our Best.

Features

  • Paint & primer-in-one for excellent hide and coverage
  • 100% acrylic cross-linking resin technology for high durability and excellent adhesion over multiple substrates
  • Exclusive RYB (Red, Yellow, Blue) base reduces number of coats, even in the deepest hues
  • Ti02 levels that deliver clean whites
  • Excellent flow & leveling for a smooth finish
  • Excellent stain and scrub resistance for easy clean-up and lasting beauty
  • Provides a mildew-resistant coating 

Where to use

  • Interior walls and ceilings
  • High-traffic areas
  • Playrooms
  • Kitchens
  • Bathrooms
  • Living Rooms

Details

Area Preparation: Surface must be dry. Remove all loose, peeling paint, dirt, grease and any other surface contaminants. Putty all nail holes, and caulk all cracks and open seams. Sand all glossy, rough, and patched surfaces. Masonry and plaster surfaces must be allowed to cure for 30 days prior to painting. When Grand Distinction Paint & Primer in One is applied to an uncoated substrate, two coats are required, with the first coat acting as the primer. For stains, water marks, and challenging conditions use a premium problem solving primer.

If you scrape, sand, or remove old paint, you may release lead dust or fumes. LEAD IS TOXIC. EXPOSURE TO LEAD DUST OR FUMES CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a properly fitted NIOSH-approved respirator and prevent skin contact to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. 

Before you start, find out how to protect yourself and your family by contacting the USEPA National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead. Follow these instructions to control exposure to other hazardous substances that may be released during surface preparation.

Application: Stir thoroughly. Apply with a high quality brush, roller, paint pad, or by spray equipment (.015"-.019" spray tip.) When using more than one container of the same color, intermix to ensure color uniformity. Thinning is usually not required. If necessary, thin with up to 1/4 pint (118 mL) of water per U.S. gallon (3.78 Liters) of paint.

Application Temperature: Apply when air, product, and surface temperatures are between 50°F (10°C) and 90°F (32°C).

Drying Time: Normally dries to touch in one hour at 77°F (25°C) and 50% relative humidity. Allow four hours before recoating. Drying times listed may vary depending on temperature, humidity, color, film build, and air movement. Wait at least 14 days after painting before cleaning the surface with a non-abrasive, mild cleanser.

Cleanup: Clean tools with warm, soapy water.

Sizes & Datasheets

Product Code Finish Size MSDS
35-110 Flat Quart, One Gallon, Five Gallon MSDS
35-115 Flat Quart, One Gallon, Five Gallon MSDS
35-116 Flat Quart, One Gallon MSDS
35-117 Flat Quart, One Gallon MSDS
35-1210 Ceramic Flat Enamel Quart, One Gallon, Five Gallon MSDS
35-1215 Ceramic Flat Enamel Quart, One Gallon, Five Gallon MSDS
35-1216 Ceramic Flat Enamel Quart, One Gallon, Five Gallon MSDS
35-1217 Ceramic Flat Enamel Quart, One Gallon, Five Gallon MSDS
35-1218 Ceramic Flat Enamel Quart, One Gallon, Five Gallon MSDS
35-1310 Eggshell Quart, One Gallon, Five Gallon MSDS
35-1315 Eggshell Quart, One Gallon, Five Gallon MSDS
35-1316 Eggshell Quart, One Gallon MSDS
35-1317 Eggshell Quart, One Gallon MSDS
35-1318 Eggshell Quart, One Gallon MSDS
35-210 Satin Quart, One Gallon, Five Gallon MSDS
35-215 Satin Quart, One Gallon, Five Gallon MSDS
35-216 Satin Quart, One Gallon, Five Gallon MSDS
35-217 Satin Quart, One Gallon, Five Gallon MSDS
35-218 Satin Quart, One Gallon, Five Gallon MSDS
35-310 Semi-Gloss Enamel Quart, One Gallon, Five Gallon MSDS
35-315 Semi-Gloss Enamel Quart, One Gallon, Five Gallon MSDS
35-316 Semi-Gloss Enamel Quart, One Gallon MSDS
35-317 Semi-Gloss Enamel Quart, One Gallon MSDS
35-318 Semi-Gloss Enamel Quart, One Gallon MSDS