Wood Stripper

Wood Stripper

Pittsburgh Paints & Stains Wood Stripper is a premium quality, ready to use stripper specially formulated to remove all oil and latex deck coatings, solid and semi-transparent stains, varnishes, polyurethanes, and water sealers. 


  • Removes Latex or Oil Coatings
  • Ready to Use – No Mixing Required
  • For Decks, Fences & Siding
  • Covers up to 150 sq. ft.

Where to use

For exterior use only. Use on decks, wood siding, shakes, shingles, and fences. Use on previously coated wood surfaces that need to be stripped.


Surface Preparation: Spray all plants and vegetation liberally with water before and after application. Cover delicate vegetation to avoid damage.

Application: Test a small, inconspicuous area prior to use to ensure acceptable appearance. Apply liberally with a nylon brush or roller. Do not allow the stripper to come into contact with bare metal or surfaces that are to remain coated. Do not allow the stripper to dry. If drying occurs, mist with water and reapply stripper. Wait five to 45 minutes for the stripper to soften or dissolve the coating. Coating will easily rinse off when ready. Scrub areas where needed with a stiff bristle brush. Work in the direction of the wood grain to minimize grain raising. Rinse wood thoroughly with water from a garden hose or a power washer at a setting of 500 to 1,200 psi to eliminate scrubbing.

Application Temperature: Apply when air, product, and surface temperatures are at least 50°F.

Drying Time: Do not allow the stripper to dry. If drying occurs, mist with water and reapply stripper.

Cleanup: Clean brushes and equipment immediately with soap and water.

Sizes & Datasheets

Product Code Finish Size TDS SDS
41-2001 N/A One Gallon TDS SDS