Lucite<sup>®</sup> Reward<sup>®</sup> Exterior Stain

Lucite® Reward® Exterior Stain

Economical Lucite Reward stain delivers good durability, coverage, and quality, time after time. It’s fast drying, it cleans up with soap and water, and it’s an ideal solution for sealing out the elements and protecting the performance and appearance of your exterior wood surfaces. Great value, in the familiar redwood color.


  • Semi-transparent finish (one coat)
  • Solid finish (two coats)
  • Interior/exterior application
  • Two hour drying time
  • Easy water clean up

Where to use

  • Exterior new or previously stained wood
  • Shingles
  • Shakes
  • Siding
  • Paneling
  • Fences


Area Preparation: Surface must be clean and free of dust, dirt, mildew, oil and oil contaminants. Remove loose, peeling stain and loose wood fibers by sanding, scraping or wire brushing.

Application: Stir thoroughly. Apply with a high quality brush, roller, paint pad or by spray equipment. If rolled or spray applied, back brushing is required. To help avoid lap marks, apply to only a few boards at a time keeping a wet edge. Semi-Transparent effect: A single coat on new wood allows enough grain to show the natural beauty of the wood. Solid color effect: Two coats offer good hiding over new or weathered wood, combining the natural wood texture with a rich redwood color. Let dry two hours between coats. 

Application Temperature: Apply only when air, product, and surface temperatures are between 50°F (10°C) and 90°F (32°C).

Drying Time: Normally dries in 30 minutes when applied in temperatures of 50°F (10°C) to 85°F (29°C).

Cleanup: Clean brushes and tools with warm, soapy water.

Sizes & Datasheets

Product Code Finish Size TDS SDS
63040A Semi-Transparent One Gallon TDS SDS