Weatherscreen® Exterior Stain (Semi-Transparent)
Weatherscreen exterior semi-transparent stain is specially formulated for decks and adds subtle color while allowing the natural wood grain and texture to show through.
- Waterproofing protection
- Sunblock UV protection that guards against sun damage
- Scuff Guard® protection from scuffing and scraping
- Durable acrylic oil formula
- Provides a mildew-resistant coating
Where to use
For use on exterior wood decks, fences, siding, railings, outdoor furniture, and other wood surfaces. May be used on new wood, pressure-treated wood, and wood previously coated with a solvent-based or semi-transparent stain.
Area Preparation: Surface must be clean, dry and free of all dust, dirt, mildew, oil and other contaminants. Decks: Clean weathered, dirty or mildewed surfaces prior to applying product. Fences and Siding: Remove and inhibit mildew. Remove grade stamps, pencil marks, etc. by sanding.
Application: Stir thoroughly and often during use. Test a small area to ensure color uniformity. Apply two thin coats with a high quality brush, roller, paint pad or by spray equipment. When spraying, always back brush for best results. To help avoid lap marks, apply to only a few boards at a time keeping a wet edge. Do not thin.
Application Temperature: Apply only when air, product, and surface temperatures are between 50°F (10°C) and 90°F (32°C).
Drying Time: Normally dries in 24 hours when applied in temperatures of 50°F (10°C) to 85°F (29°C).
Cleanup: Clean brushes and tools with mineral spritis. Rags, steel woodl, or waste soaked with Weatherscreen Semi-Transparent deck stain may spontaneuosly catch fire if imporerly discarded. Immediately after use, place rags, steel wool, or water in a sealed, water-filled metal container.
Sizes & Datasheets