Paramount™ Interior Paint – One Coat White

Paramount™ Interior Paint – One Coat White

It’s not just paint, it’s Paramount.
 
Paramount is designed to exceed your performance expectations.  It’s the perfect blend of cutting edge paint & color technology and style expertise – the most advanced protection you can get in true one coat coverage with exceptional stain blocking and hiding.
 
And now, you can get that same outstanding protection with our NEW Paramount One Coat White, providing a beautiful white finish to all of your projects - in just one coat.

Features

  • Ready to use One Coat White
  • Super Premium Paint & Primer in One
  • Delivers True One Coat Coverage
  • Provides a Durable & Washable Protective Shield
  • Superior Stainblocking & Hiding


 

Where to use

  • Interior Walls, Ceiling and Trim
  • High Traffic Areas
  • Playrooms
  • Kitchens
  • Bathrooms
  • Living Rooms

Details

Area Preparation: Surface must be clean and dry. Remove all loose and peeling paint, dirt, grease and any other surface contaminants. Putty all nail holes and caulk all cracks and open seams. Sand all glossy, rough and patched surfaces. Masonry and plaster surfaces must be allowed to cure for 30 days prior to painting. Uncoated substrates, repaired surfaces or lightly stained areas may require additional coats. For severe stains, water marks, and other challenging conditions use the appropriate primer. WARNING! If you scrape, sand, or remove old paint, you may release lead dust or fumes. LEAD IS TOXIC. EXPOSURE TO LEAD DUST OR FUMES CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a properly fitted NIOSH-approved respirator and prevent skin contact to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the USEPA National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead. Follow these instructions to control exposure to other hazardous substances that may be released during surface preparation.

Application: Stir thoroughly. Apply with a high quality brush, roller, paint pad or by spray equipment. For airless spray application, use tip size .015 "–.021 " and pressure range of 1500 – 2000 psi. When using more than one container of the same color, intermix to ensure color uniformity. Do not thin.

Application Temperature: Apply only when air, product, and surface temperatures are between 50°F (10°C) and 90°F (32°C).

Drying Time: Normally dries to touch in 1 hour at 77°F (25°C) and 50% relative humidity. Allow four hours before recoating. Drying times listed may vary depending on temperature, humidity, color, film build, and air movement. Wait at least 30 days after painting before cleaning the surface with a non-abrasive, mild cleanser. Very deep colors may require longer to fully cure.

Cleanup: Clean tools with warm, soapy water. Clean spills right away with a damp cloth.

Paramount Paint - Most Advanced Protection

Sizes & Datasheets

Product Code Finish Size TDS SDS
37-2118 Flat Quart, One Gallon, Five Gallon TDS SDS
37-3318 Eggshell Quart, One Gallon, Five Gallon TDS SDS
37-2218 Satin Quart, One Gallon, Five Gallon TDS SDS
37-2318 Semi-Gloss Quart, One Gallon, Five Gallon TDS SDS