PITTSBURGH PAINTS & STAINS® ULTRA Interior/Exterior High Gloss Paint & Primer

Size

Gallon/3.78 L (01), Quart/946 mL (04), GALLON/3.78 L (01)

Sheen

Gloss, High gloss, Flat, SEMI GLOSS

Professional Painter

Product Details

Pittsburgh Paints & Stains Ultra Interior/Exterior paint and primer* in one is 100% acrylic latex and delivers a resilient, high-gloss finish for high-traffic doors and trim inside and outside your home. Backed by a lifetime warranty.

Features:

  • Highly Durable 100% Acrylic Latex
  • Excellent Adhesion to Indoor and Outdoor Substrates
  • Minimizes Roller and Brush Marks
  • Fast Drying
  • Easy Water Cleanup
  • Resists Blocking
*Separate primer or multiple coats may be required. See back for details.

Area Preparation

Surface must be dry. Remove all loose and peeling paint, dirt, grease, and any other surface contaminants. Putty all nail holes, and caulk all cracks and open seams. Sand all glossy, rough, and patched surfaces. Masonry and plaster surfaces must be allowed to cure for 30 days prior to painting. Prime all bare walls, wood, drywall, plaster, masonry, metal and porous surfaces with the appropriate primer.

WARNING! If you scrape, sand, or remove old paint, you may release lead dust or fumes. LEAD IS TOXIC. EXPOSURE TO LEAD DUST OR FUMES CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a properly fitted NIOSH-approved respirator and prevent skin contact to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop.

Before you start, find out how to protect yourself and your family by contacting the USEPA National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead. Follow these instructions to control exposure to other hazardous substances that may be released during surface preparation.

Application Details

Stir thoroughly. Apply with a high quality brush, roller, paint pad or by spray equipment. For airless spray application, the minimum recommended tip size is .015" and pressure range of 1500 – 2000 psi. When using more than one container of the same color, intermix to ensure color uniformity. Thinning is usually not required.

Apply only when air, product, and surface temperatures are between 50°F (10°C) and 90°F (32°C).

Drying Time

Normally dries to touch in 30 minutes to 1 hour at 77°F (25°C) and 50% relative humidity.

Coverage

Approximately 300 to 400 sq. ft. (28 to 37 sq. meters) per U.S. gallon (3.78 L) on primed, smooth, nonporous surfaces. Coverage figures do not include material loss due to surface irregularities and porosity, or material loss due to application method or mixing.

Cleanup

Clean tools with warm, soapy water.

Code Finish Base Sizes Download
41-1310 Gloss White & Pastel Base Gallon/3.78 L (01), Quart/946 mL (04)
41-1315 Gloss Midtone/Intermediate Base Gallon/3.78 L (01), Quart/946 mL (04)
41-1317 Gloss Neutral/Ultradeep/Accent/Clear Gallon/3.78 L (01), Quart/946 mL (04)
41-1345 High gloss Ready Mix White Gallon/3.78 L (01)
41-1345 Gloss White & Pastel Base Quart/946 mL (04)
UC106N Flat NEUTRAL/ULTRADEEP/ACCENT/CLEAR GALLON/3.78 L (01)
UC306N SEMI GLOSS NEUTRAL/ULTRADEEP/ACCENT/CLEAR Gallon/3.78 L (01)