Paramount Log Cabin & Wood Siding Finish

Paramount Log Cabin & Wood Siding Finish

Pittsburgh Paints & Stains Paramount Log Cabin & Wood Siding Finish features a varnish-like, satin finish for exterior logs and wood siding. This satin semi-transparent finish protects and enhances woods’ natural beauty. It is available in three ready-to-use colors: Cedar, Teak, Dark Oak. 



  • Simply our best - Lifetime results guarantee 
  • Varnish-like, satin finish
  • High-transparency pigments for rich, durable color
  • Seals and protects from UV and moisture
  • Provides a mold and mildew resistant finish
  • Protects against cracking and splitting of wood
  • Alkyd resin system

Where to use

Use on exterior, properly prepared wood siding, logs, railings, trim, and other wood surfaces. Apply to new, dry, pressure-treated wood, uncoated new or weathered wood. Use on exotic hardwoods may affect coverage, dry time, and durability. Not intended for horizontal surfaces that will be exposed to foot traffic. Please refer to the product label or technical data sheet for safety and detailed application instructions.


Area Preparation:
All wood surfaces must be thoroughly clean, dry and free of dirt, grease, grime, mildew, mill glaze and previous coatings before application.

Application: Application using a natural bristle brush is the preferred method. If applied by roller or airless sprayer, back-brush immediately to ensure penetration and to avoid an uneven finish. Allow to dry a minimum of 24 hours. Apply a second coat.

Application Temperature: Apply when air and surface temperature is between 50°F (10°C) to 90°F (32°C). Do not apply in direct sunlight, if rain, snow, heavy dew or low temperatures below 40°F (4°C) are expected within 48 hours.

Drying Time: Dries to touch in approximately 12 hours at 77°F (25°C) and 50% relative humidity. Dries to recoat in 24 hours. Additional coats may increase these times. Low temperature, high humidity, thick films, or poor ventilation will increase these times. Avoid heavy abrasions immediately following application.

Cleanup: Clean tools immediately with mineral spirits. Clean spills right away with a damp cloth.

Sizes & Datasheets

Product Code Finish Size TDS SDS
41-9901 Semi-Transparent One Gallon TDS SDS
41-9902 Semi-Transparent One Gallon TDS SDS
41-9903 Semi-Transparent One Gallon TDS SDS
41-9901 Satin One Gallon TDS SDS
41-9902 Satin One Gallon TDS SDS
41-9903 Satin One Gallon TDS SDS