Pittsburgh Paints & Stains ULTRA Advanced Toner is a premium-quality wood stain & sealant in one that delivers high performance and durability. It provides a slight hint of color to wood and allows the natural wood grain and texture to show through. It resists graying from UV exposure. Ultra Advanced offers a satisfaction guarantee.
- Wood Stain and Sealant in One
- Advanced Two-Way Waterproofing Protection
- Ultra UV Premium Protection Guards Against Sun Damage
- Provides a Dual-Action Mold and Mildew Resistant Coating
- Exclusive Scuff Guard® Protection Shields Against Scuffing and Abrasions
Surface must be clean and dry. Remove all dust, dirt, mildew, oil, loose wood fibers, and other contaminants. Previous coatings must be completely removed. To ensure proper penetration, weathered, dirty, or mildewed surfaces should be cleaned with a wood cleaner prior to applying stain. After rinsing, allow wood to dry.
WARNING! If you scrape, sand, or remove old paint, you may release lead dust or fumes. LEAD IS TOXIC. EXPOSURE TO LEAD DUST OR FUMES CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a properly fitted, NIOSH-approved respirator and prevent skin contact to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the USEPA National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead. Follow these instructions to control exposure to other hazardous substances that may be released during surface preparation.
DO NOT THIN. Intermix containers to ensure color uniformity. Stir thoroughly and often during use. Apply to a small area and allow stain to dry to ensure acceptable appearance and penetration. Apply one thin coat with a high-quality brush, paint/stain pad, or with spray equipment. When applying by roller or spray, always back-brush for best results. To help avoid lap marks, apply to only a few boards at a time, and maintain a wet edge.
Apply when no precipitation is expected for 24 hours, and when air and surface temperatures are 50°F (10°C) to 90°F (32°C) and will remain above 50°F (10°C) for the next 24 hours. Avoid staining in direct sunlight or on hot surfaces.
Normally dries in 24 hours when applied in optimal temperatures of 50°F (10°C) to 85°F (29°C). Application in high humidity or in temperatures below 50°F (10°C) may prolong drying times. Allow 24 to 48 hours of drying time before light foot traffic or replacing furniture.
Approximately 250 to 350 sq. ft. (23 to 33 sq. meters) per gallon (3.78 L) depending on application, wood texture, and porosity.
Please refer to the Product Label, Technical Data Sheet (TDS) or Safety Data Sheet (SDS) for detailed application and safety instructions.
|41-2501||Stain - Custom Color||Gallon/3.78 L (01), 5 Gallons/18.9 L (05)|
|41-2502||Stain - Custom Color||Gallon/3.78 L (01), 5 Gallons/18.9 L (05)|
|41-2503||Stain - Custom Color||5 Gallons/18.9 L (05), Gallon/3.78 L (01)|
|41-2504||Stain - Custom Color||5 Gallons/18.9 L (05), Gallon/3.78 L (01)|
|41-3501||Stain - Custom Color||5 Gallons/18.9 L (05), Gallon/3.78 L (01)|
|41-3502||Stain - Custom Color||Gallon/3.78 L (01), 5 Gallons/18.9 L (05)|
|41-3503||Stain - Custom Color||Gallon/3.78 L (01), 5 Gallons/18.9 L (05)|
|41-3504||Stain - Custom Color||Gallon/3.78 L (01), 5 Gallons/18.9 L (05)|