Weatherscreen<sup>®</sup> Exterior Stain (Solid Color)

Weatherscreen® Exterior Stain (Solid Color)

Weatherscreen exterior solid color stain is specially formulated for decks and delivers an opaque finish that allows wood's nautural texture to show through.


  • Waterproofing protection
  • Sunblock UV protection that guards against sun damage
  • 100% acrylic latex formula provides strong adhesion
  • Provides powerful mildew resistance on the coating
  • Scuff Guard® protection

Where to use

For use on exterior wood decks, fences, siding, railings, outdoor furniture, and other wood surfaces. May be used on new wood, pressure-treated wood, weathered wood, and wood previously coated with a solvent-based or semi-transparent stain.


Area Preparation: Surface must be clean, dry and free of all dust, dirt, mildew, oil and other contaminants. Decks: Clean weathered, dirty or mildewed surfaces prior to applying product. Fences and Siding: Remove and inhibit mildew. Remove grade stamps, pencil marks, etc. by sanding.

Application: Stir thoroughly and often during use. Test a small area to ensure color uniformity. Apply two thin coats with a high quality brush, roller, paint pad or by spray equipment. When spraying, always back brush for best results. To help avoid lap marks, apply to only a few boards at a time keeping a wet edge. Do not thin.

Application Temperature: Apply only when air, product, and surface temperatures are between 50°F (10°C) and 90°F (32°C).

Drying Time: Normally dries in 30 minutes when applied in temperatures of 50°F (10°C) to 85°F (29°C).

Cleanup: Clean brushes and tools with warm, soapy water.

Sizes & Datasheets

Product Code Finish Size TDS SDS
41-5701 Solid Color One Gallon TDS SDS
41-5702 Solid Color One Gallon TDS SDS
41-5712 Solid Color One Gallon TDS SDS
41-5713 Solid Color One Gallon TDS SDS
41-5721 Solid Color One Gallon TDS SDS