Trim, Door & Furniture
Pitsburgh Paints & Stains Trim, Door & Furniture paint is the solution for updating your home so it can withstand even the most active lifestyles. The high-performance alkyd/oil formula resists chipping and scuffing, and gives UV protection while providing a high gloss, smooth, glass-like finish.
- Gel consistency for easy application
- Alkyd/oil formula that resists chipping and scuffing
- High gloss sheen provides a smooth, glass-like finish with no brush marks
- UV protection resists fading for indoor or outdoor use
Where to use
Ideal for indoor and outdoor surfaces such as trim, furniture, cabinets, and exterior and interior doors.
Area Preparation: Paint on clean, dry, and sounds surfaces. Fills cracks and nail holes with latex spackle. Sand smooth and dust clean, if needed. Prime new surfaces.
If you scrape, sand, or remove old paint, you may release lead dust or fumes. LEAD IS TOXIC. EXPOSURE TO LEAD DUST OR FUMES CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a properly fitted NIOSH-approved respirator and prevent skin contact to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop.
Before you start, find out how to protect yourself and your family by contacting the USEPA National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead. Follow these instructions to control exposure to other hazardous substances that may be released during surface preparation.
Application: Product is ready to use. Do not thin. If any separation is present, gentle stir until mixed, shake if necessary. Apply with a premium quality china bristle brush or nylon/polyester blend brush. Dip brush into the quart can and begin brushing. As you brush paint with thin. Brush until paint finish is smoother and even. Re-dipbrush and repeat. Minor brush marks with self-level. Follow with back brushing for smoothest finish.
Application Temperature: Apply only when surface or air pemperature is above 40°F (4°C).
Drying Time: At 77°F (25°C) dries to touch in 4-6 hours, to handle in 8 hours and to recoat overnight. Furniture or shelving may be put into use 72 hours after final coat. Doors or cabinets may be closed 24 hours after final coat.
Cleanup: Clean tools immediately with mineral spirits or VM&P Naptha.
Sizes & Datasheets