.png){kind=logo}
Revitalize® Resurfacer & Sealant in One
Pittsburgh Paints & Stains® Revitalize is a line of premium resurfacers specifically formulated to revitalize the full spectrum of lightly to severely weathered or damaged wood and concrete. As a resurfacer and sealant in one, Revitalize gives new life to time-worn wood and concrete. Pittsburgh Paints & Stains® Revitalize products may allow you to save the expense of replacing damaged wood or concrete.
Lightly Damaged Wood
Lightly Damaged Wood
Revitalize Light Resurfacer & Sealant in One is ideal for lightly weathered wood and concrete.
Features:
-
Waterproofing protection
-
Barefoot friendly and slip resistant
-
Conceals hairline cracks
-
Provides a mildew-resistant coating
-
Resists fading
-
Self-priming
-
Easy soap and water cleanup
-
Available in all 130 solid stain colors
Heavily Damaged Wood
Severely Damaged Wood
Revitalize Heavy to Moderate Wood and Concrete Resurfacer extends the life of more severely weathered or damaged wood or concrete.
Features:
-
Waterproofing protection
-
Barefoot friendly and slip resistant
-
Locks down splinters
-
Fills cracks up to 1/4"
-
Provides a mildew-resistant coating
-
Resists fading
-
Self-priming
-
Easy soap and water clean up
-
Available in all 130 solid stain colors
Prep is Key to Great Results
Follow these four steps to prepare the wood surface:
Step 1: Scrape the wood to remove peeling paint or stain.
WARNING! If you scrape, sand or remove old paint, you may release lead dust. Lead is toxic. If you suspect that there is lead in the paint, contact the USEPA National Lead Information Hotline at 1-800-0424-LEAD or log on to www.epa.gov/lead for more information.
Step 2: Clean the wood surface with Pittsburgh Paints and Stains Ultra Deck Cleaner
Step 3: Pressure wash and sand to remove loose wood fibers.
Step 4: Use Revitalize to fill in cracks in the wood:
- When using Revitalize Heavy-Moderate, you can fill cracks and depressions up to 1/4 inch deep.
- Revitalize Light is for hairline cracks only.
Application Instructions
Once the surface is properly prepared, it is easy to apply Revitalize:
Step 1: Cut in and apply first coat with 1/2" naproller or high-quality brush.
Step 2: Apply second coat. Two coats are required.
Please refer to the Product Label, Technical Data Sheet (TDS) or Safety Data Sheet (SDS) for detailed application and safety instructions.