Ultra Advanced Exterior Stain (Solid Color)

Ultra Advanced Exterior Stain (Solid Color)

Pittsburgh Paints & Stains Ultra Advanced Solid Color Stain is a premium-quality stain and waterproofing sealant in one product. Rich, opaque color hides signs of aging while allowing the natural texture of wood to show, making it ideal for older wood. A self-priming, 100% acrylic stain, Pittsburgh Paints & Stains Ultra Advanced Solid Color stain delivers our best protection in a solid color stain.


  • Stain and sealant in one both protects and beautifies with a single brush stroke
  • Advanced two-way waterproofing protection
  • Ultra UV premium protection guards against sun damage
  • Provides a mildew-resistant coating
  • Low temperature application down to 35°F

Where to use

  • Exterior wood surfaces
  • Decks
  • Siding
  • Fences
  • Outdoor furniture
  • New wood
  • Pressure-treated wood
  • Weathered wood


Surface Preparation: Surface must be clean, dry and free of all dust, dirt, mildew, oil, loose wood fibers and other contaminants. Remove loose, peeling stain or paint by sanding, scraping or wire brushing. Use an exterior wood cleaner to prepare new wood prior to coating, and to clean and restore weathered, dirty surfaces and remove mildew stains. After rinsing, allow wood to dry.

Application: DO NOT THIN. Stir thoroughly and often during use. Apply to a small area and allow to dry to ensure acceptable appearance. Intermix containers to ensure color uniformity. Apply two thin coats with a high quality brush, roller, paint/stain pad or by spray equipment. When rolling or spraying, always backbrush for best results. Some colors, or a drastic color change may require an additional coat to achieve a uniform finish. To help avoid lap marks, apply to only a few boards at a time, and maintain a wet edge.

Application Temperature: Apply when no precipitation is expected for 12 hours, and when air and surface temperatures are 35°F to 90°F (2°C to 32°C) and will remain above 35°F (2°C) for the next 24 hours. Avoid staining in direct sunlight or on hot surfaces.

Drying Time: Normally dries to touch in 30 minutes when applied in temperatures of 50°F (10°C) to 85°F (29°C). Allow 2 to 4 hours between coats or before recoating. High humidity or low temperature application may prolong drying and recoating times. Allow 24 to 48 hours of drying time for light foot traffic or furniture placement. Newly stained surfaces should be allowed to cure 30 days before washing.

Cleanup: Clean brushes and tools with warm, soapy water.

Sizes & Datasheets

Product Code Finish Size TDS SDS
41-2701 Solid Color One Gallon TDS SDS
41-2702 Solid Color One Gallon TDS SDS
41-2703 Solid Color One Gallon TDS SDS
41-2704 Solid Color One Gallon TDS SDS
41-2705 Solid Color One Gallon TDS SDS
41-2706 Solid Color One Gallon TDS SDS