.png){kind=logo}
Wood Staining Steps
Once your wood is cleaned and prepped, follow these steps for applying wood stain. If the wood is older and has some damage, you may need to use Revitalize. You will want to follow the specialized Revitalize application instructions.
PITTSBURGH PAINTS & STAINS PRODUCTS
Find the perfect product for your next project
Pre-stain Steps
Wood Prep
Make sure your wood is properly cleaned and prepared before applying stain.
Apply stain to a small area and allow to dry, to ensure acceptable appearance and preparation.
Tip: Cover surrounding areas, especially plants, to protect them from overspray and drips.
Learn How To Prep Wood for Staining
Stain Application
Preparing to Stain
Intermix containers to ensure color uniformity.
Stir thoroughly and often during use.
Stain railings prior to the deck surface.
Always remember to stain downwards, and to protect your deck surface from drips.
Find the Right Exterior Stain for Your Project
Stain Application
Applying the Stain
Using a high-quality brush, roller, stain pad or spray equipment:
-
Apply one coat for clears, toners and semi-transparent stains.
-
Apply two coats for solid color stains, Paramount Stains or Revitalize.
-
To help avoid lap marks, apply to only a few boards at a time, keeping a wet edge.
-
Back brushing is recommended for a more even finish and to ensure proper penetration.
Please refer to the Product Label, Technical Data Sheet (TDS) or Safety Data Sheet (SDS) for safety and detailed application instructions.
Allow a minimum of 24 hours of drying time before putting any furniture back on your deck. Check the product label for the appropriate cleanup method.
Find the Right Wood Stain Type for Your Project